Products |

HOME / Products | / Self Tapping Threaded InsertInstallation

Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation Self Tapping Threaded InsertInstallation
  • NAME
    Self Tapping Threaded InsertInstallation
  • DESCRIPTION

INFO

SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS
I. HOLE SIZE:
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

II. HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

III. COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

IV. WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST


SELF TAPPING THREAD INSERTS - MANUAL INSTALLATION TOOLS
self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw self tapping threaded insert,threaded insert,stripped savior,insert,nut insert,self-threading inserts,self cutting threaded insert,self tapping inserts,self locking inserts,top screw
 

 

Q&A

  • NAME
  • PHONE
  • TEL
  • E-mail
  • CHECK
  • CONTENT
© All Rights Reserved.
Designed by YKQK Design    BACK

  

Top Screw have been manufacturing high quality products fasteners, like blind rivets, blind rivet nuts, customized fasteners since 1975,Top screw Metal corp ,insert nut